• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional comes out and repair the window repair. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a variety of issues such as sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. It's important to take action as soon as you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're happy with the fit, tighten the screws until they stay in position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is important to replace your seal as quickly as you can in order to keep your uPVC window repair waterproof and draughtproof.

UPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. You'll first need to close the window and perform an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

It is important to take action if get up each morning to find a smoky wall and wet floors. The leaks of water from windows do not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with a breeze it could be hinges at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It is an easy process, but it's easier if you have someone to help hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by poor installation at the factory. Sending us a photo via our website will often resolve the problem. We are always happy to offer advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. First, the hinges because of wear and tear, may become displaced, which will cause an opening to appear where the sash meets the frame. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge of the window and can be misaligned. Again, it may be feasible to give them a thorough clean, however in some cases it might be necessary to get them replaced.

The next most common reason for draughts are the window seals. These can become worn down or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking out cold air.

With a little maintenance and repairs windows made of upvc will continue to provide a great level of security and insulation for your home. It is essential to remember that all windows will eventually wear out and it is cheaper to replace them instead of fixing them. If you are having issues with your upvc windows, it is recommended to seek help from a professional immediately.