• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers that help the new pane to fit correctly into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall onto the fabric rather than on the floor where they can be trodden under and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will keep drafts and water from entering your property until a professional arrives to repair the window repair near me. This will also provide an obstacle to stop intruders from getting into your home. If the gap is large, you may be interested in a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sagging. A sagging window in uPVC could cause issues with light, draughts and even security. It's important to take action as soon as you discover that your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows to reach the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in the right place.

If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. Often it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. You'll first need to close the window and do an experiment fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is crucial to act if you awake each day to find a smoky wall and wet floors. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a fairly simple fix that can be completed by any DIY expert. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is more with the seal rather than the frame. A upvc window repair near me specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens with an ease. They can be replaced by any competent DIYer and can usually be completed in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a simple process but it can be easier if you have someone to help you hold the frame up.

Verify that the uPVC hinges open and close in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain manner or because of improper installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to give suggestions.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be unbalanced due to wear, which can cause an opening between the frame and sash. If they are beyond repair, it could be necessary to have them realigned. The second is the interlock, which is located on the hinge side of the window, may also be misaligned, and again it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it is more cost-effective to replace them instead of fixing them. If you are experiencing issues with your window made of Upvc Window Repair, it's best to consult an expert as soon as you can.