• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Protect your pride & joy from thieves by adding an immobiliser ghost. Our TASSA verified system protects vehicles against hacking, key cloning and vehicle immobiliser bypass.

The system is hidden inside the wiring loom of your vehicle, so it is completely inaccessible to anyone who is looking. It operates by generating pin code push sequences through existing buttons on the steering wheel, door cards, and centre console.

No circuit cuts

It's not a surprise that people are keen to secure the car they've worked so hard to buy. Traditional security systems, such as alarms or wheel locks can be easily bypassed by thieves. Ghost immobilisers on the other hand is a very effective solution that operates in a quiet manner and isn't easily detected by modern thieves.

A ghost immobiliser is a hidden device that connects to your vehicle's CAN data network to shut down the engine without the use of radio frequencies or key fobs. It communicates with your vehicle's ECU through existing buttons on the steering wheel, dash and door panels to generate a unique pin code that you only know. The code can be changed at any point and can be up to 20 digits in length, based on your preference. It also comes with an emergency code that you could use in the event of forgetting your PIN.

The ghost immobiliser is also useful to prevent the relay box inside your home from transferring the signal from your car key, which would open the doors and begin your vehicle. It could even block advanced methods of stealing your vehicle such as OBD port hacking. The device is tiny and weatherproof, meaning it's hard to spot and is even more difficult to interfere with.

The ghost immobiliser has another advantage: it can be fitted to your vehicle without leaving any permanent marks. It's ideal for those who plan to sell their car in the near future. It's also faster and simpler to install as compared to a factory-fitted unit.

The Autowatch Ghost, a groundbreaking new generation device, stops contactless car thefts by connecting to the CAN network of a vehicle and using the buttons to generate a unique PIN code. This is a snoopy device that can be installed with no wires cut and doesn't require any additional key fobs. It is also connected to the vehicle's original ECU, preventing thieves from gaining access by using an additional key or replacing the ECU with an "relay". This system is TASSA certified and can be linked to an International Security Register, allowing owners confidence that their vehicles are protected against theft.

No RF scanning

You'll want to secure your vehicle from theft when you have spent lots of money and time customizing it. One method to do this is by installing an immobiliser, which will stop your engine from running until you enter a unique PIN. You can generate a 20-digit code by pressing the buttons on your dashboard and steering wheel. This will ensure that only you are able to drive your car. You can also create a valet and service mode that will allow you to temporarily start your car without entering the PIN code. This will allow your technician to work on your car without you being there. This is a great option for those who want to cut down on time and simplify their lives.

A ghost immobiliser, a new generation device, connects to the CAN data network of your vehicle. It uses the buttons located on the dashboard and the steering wheel to set a PIN number. It is designed to blend in with the rest of your vehicle, since it doesn't emit any noise or LED indicator. It can be placed anywhere on your vehicle, without altering the look of the vehicle.

This stealthy system is TASSA approved and can cut down on the cost of insurance. It also has an ability to track your vehicle, which can locate your vehicle even if it has been stolen. This is especially useful if you own a rare expensive vehicle that you've spent many hours customizing.

Autowatch ghost immobiliser fitting, in conjunction with the iPhone app allows you to remotely start your vehicle if you have forgotten your PIN or are unable to access your vehicle. This feature is great for when you have to collect your kids or run errands, but don't want to put yourself at risk by letting having someone else drive your vehicle. This feature is useful in the event that you need to bring your vehicle in to be repaired or serviced.

Another advantage of the Ghost is that it does not transmit or detect radio frequency signals, making it unnoticeable to thieves using RF scanning or code technology to capture codes. It can also protect your vehicle from key cloning, ECU swapping and other usual methods of car theft.

There is no key to cloning

Ghost immobilisers are a fantastic option to protect high-end automobiles and are designed to block key replication. They stop your vehicle from being started until a PIN code has been entered along with the standard key fob. This makes it extremely difficult for thieves to rob your vehicle and Ghost Immobiliser Fitting can also stop them from trying it initially. This is a good idea if your vehicle has been heavily customized or if it's a rare model.

These immobilisers connect to the vehicle's onboard CAN network and are completely hidden which means there is no indication of its presence inside the vehicle. It is also impossible for a burglar to locate the device using radio frequency scanning or code grabbing technology. This means that a thief will have to spend much longer in order to successfully steal your vehicle.

To bypass the system a thief must be aware of the unique pin code and the location of the Ghost. The pin code is exclusive to you and you can change it as many times as you need to. The pin code you select is easy to remember, however, it is mathematically impossible for anyone else to figure out. The engineer will also provide an emergency pin number in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof and can be installed in any part of your vehicle. It is compatible with all vehicles and is completely customizable to match the style of your car. It is also very easy to use and cost-effective. The device can be transferred to another vehicle, provided that it is compatible with the new vehicle.

The CAN bus is compatible with other security features. It could, for instance detect damage to the vehicle and notify the owner. It can also shut off the engine if it senses that the vehicle is being manipulated. The system can also protect your vehicle from hacking and key cloning. It can also detect any vibrations or contact with the vehicle. Additionally, it will warn the owner if the vehicle has been moved.

No OBD port hacking

Ghost utilizes a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from trying to hack into your vehicle to disable your alarm, disable your key fob and make new keys. This technology is an improvement over the old methods used by thieves to steal vehicles in the past. The CAN data network ensures that the system won't be affected by disconnecting or replacing the battery.

The Autowatch Ghost is the first immobiliser for CAN bus worldwide, safeguards against key-cloning, hacking, and replica car theft. It does not use LED indicators or key-fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN code sequence (up to 20 button presses) that must be entered prior to when you can drive your vehicle away.

Modern thieves are able to employ diagnostics to find circuit breaks on your vehicle. They can bypass immobilisers which require a lot wiring or are integrated in the wiring. The Ghost is weatherproof, doesn't need any additional wiring and cannot be identified by diagnostic tools that are professional. It can be put in on vehicles equipped with anti-theft devices.

A Ghost immobiliser also has a significant benefit: your vehicle can only be started by someone who knows your PIN and physically has access to your vehicle. This is a major advantage over traditional security systems that can be bypassed by simple modification of cables or a screwdriver.

If you forget your PIN you can easily reset it using the emergency PIN reset function on a mobile device or computer. This is useful if you are looking to start your vehicle after having left it in a garage, or with the valet parking service.

The Autowatch Ghost 2 is the most recent version of the product and is insurance approved by TASSA when installed by one of our authorised installers. It has an RFID fingerprint system that allows individual parts to be identified, which will enable the return of stolen parts should they be discovered. It can also be switched into 'service mode' which allows the engine to start when the vehicle is in a garage or with a valet parking service, but you will need to enter your PIN code in order to leave the vehicle.